exercises abdominal

The Utility Of Planes Of Motion In Exercise

Mobility and flexibility are integral part of any personal training program. In order to achieve this, a good personal trainer would ensure that the training routine he/she designs is well balanced.  When a training routine is well-balanced, muscle groups and movement chains are equally stressed.  On the other hand, if one particular movement chain or muscle group gets overstressed, the nervous system will make an attempt to protect its self by tightening the opposing muscle group.  A good example of such phenomena is a guy at the gym that bench presses 3-4 times a week, often to muscle failure.  The body quickly learns that priority must be placed on the ability to press allot of weight at all cost.  As a result, his posture will alter in response to the stress by shifting the shoulders forward.  This shit can help him gain strength but this is often at an expense of stiff neck, poor shoulder mechanics and even pain at the lower back.  Continual stress in such posture can yield more serious injuries, like a rotator cuff tear.

In the following article I will explain one the most important principles of a well-balanced personal training routine- planes of motion. I will also explain how planes are often be used by a personal trainer as a variable in an exercise routine.

Planes of Motion

Plane of motion refer to the direction your body/limbs are moving in. The three planes our body can move in are; segital, frontal, and transverse.

Segital plane. Segital plane refers to a front to back movement. An example of segital plane exercise would be a squat. If you look at the squat all joints move either forward or backward.

Frontal plane. Frontal plane refers to a side-to-side movement. A good example of frontal would be standing hip abduction exercise. One leg is moving to the side and the other leg is stabilizing in the same plane (interestingly, most personal training clients feel the burn on the standing leg more than the moving one).

Transverse plane. Transverse plane refers to rotational movements.  A quadruped trunk rotation is a good example of rotational movement. The axis of movement goes through the spine as illustrated. The axis represents a pivot around which the torso rotates about.

Planes of Motions as an Exercise Variable

These planes provide as an excellent exercise variable and are commonly used by a personal trainer. For example, if a personal trainer wants to train the mid section he/she could chose three exercises each EMPHASIZING three separate planes. The personal trainer can chose abdominal crunches as a segital plane exercise, side to side bending with a weighted bar as a frontal plane exercise, and standing cable rotations as a transverse exercise. These three exercises can be run one after another in a circuit format and by varying the planes a personal trainer is likely to avoid over-stressing any one movement system with their client.

Notice that I have chosen the word “emphasize”. The truth is that most exercises will place force on more than one plane. The more complex the exercise, the more planes it is likely to affect. For example, the standing cable rotations exert force on the trunk in rotational plane. However, the hips are working in a segital plane. As the torso rotates, one hip moves forward and the other backward, further generating torque needed to perform the exercise.

The complexity of planes involved in an exercise can also be used as another exercise variable. For example a personal trainer can choose to assign his/her client with one plane motion exercise like a segital dumbbell shoulder flexion followed by a standing dumbbell shoulder press with trunk rotation. Single plane exercises will usually isolate muscles and therefore they are more effective at building mass muscles. On the other hand, multi-plane exercises will integrate several muscles groups together so they are more effective at strengthening complex movements. Consequently, pairing the two allows a personal trainer to train the shoulders without overstressing them.

It is also important to notice that when you change planes you do not work different muscles but rather different sequence of muscles.  For example, the psoas muscle is involved in all three trunk exercise I previously described.  Psoas is a jack of all trades muscle, as it assists in side bending, rotation and forward movement of the torso.

Training Utility of Planes of Motion

So let’s think how we can us this concept to better train abs. I have often talked with people who would want to strengthen their abs because their lower back was in pain.  So, they have chosen to do about 100 sit ups every day. There is a good chance that the body is tightening the lower back muscles, thus causing pain, to protect the body from going into that crunch position over and over again.  In other words, the body has been overstressed in segital plane.  I am not saying that abdominal crunch is a bad exercise. Abdominal crunch is a great exercise. What I am trying to say is that abdominal muscles do more than crunch, and to effectively train them a personal trainer should choose exercises that work all movements these muscles are involved in. Here is a list of just a few common exercises in which the abdominal muscles are crucial in:

Squat (with bar) – assisting in maintaining neutral spine position
Side to side lunges – assisting in keeping the torso upright
Standing cable chest fly-the cable is pulling your torso back, abs cat to prevent this
Standing triceps extension (especially when leaning forward-cable is pulling body up and abs are pulling the torso down)
Torso cable rotations -assist, along with back extensors, at keeping the torso upright.

All of these exercises will work the abs.  HOWEVER the nature of the work the abs are doing will be different in each exercise.  In some exercises the abs work as primary movers.  In other exercises the abs are assisting at keeping stability, especially when a plane of motion is stressed in which the abs are not moving in (i.e. side to side lunge).  Once again, the difference in how abs work in each exercise can be used as a variable that can be utilized as a variation to a training routine.

Conclusion

Why is this information important?  Muscle stiffness, and eventually injury, is often caused by continual stress in a specific position or sequence of movement.  For example, most people get stiffness in their neck and shoulders by sitting in front of computer for 40 hrs a week.  Another example is a runner who performs same movement, thousands times a week, exposing his/her body to the same profile of force (segital force loading).  So, in order to avoid injuries, and in order to keep your body well balanced and stiffness free- learn how to vary planes when working out.

Abdominal Exercises for Boxers (part one)

DefaultNewest arrivalsFeatured itemsPrice: low to highPrice: high to lowBy RelevanceAverage customer review: high to low

Dynaflex Arm Shaper List Price: $39.95 Sale Price: $23.36 You save: $16.59 (42%)   Eligible for free shipping! Availability: Usually ships in 24 hours See Reviews For This Product Description The breakthrough in sculpting and toning arms. The Arm Shaper produces fast, visible results the very first time you use it. A science so incredible - the U.S. Military bought it for our soldiers. If you thought lifting heavy weights was the only way to get beautifully shaped and toned arms... Prepare to be amazed! The secret is The Arm Shaper's Gyro Mechanism. The Arm Shaper replaces traditional weight lifting and does much of the work for you. Just keep it spinning to generate results comparable to that of pure resistance lifting while barely breaking a sweat. No more flabby arms to keep you out of T-shirts, sleeveless tops and swimsuits. Noticeable results are guaranteed the very first time you use The Arm Shaper! Do away with granny arms, bat wings, and the dread arm jiggle with the Dynaflex Arm Shaper, a breakthrough in arm sculpting and toning technology. The secret to the Arm Shaper's success is the built-in gyro mechanism, which spins left-handed, right-handed, clockwise, and counter-clockwise to challenge your muscles. Just keep it spinning to generate results comparable to that of pure resistance lifting while you barely break a sweat. The science behind the Arm Shaper is so sound that the U.S. Military has purchased a number of units for its soldiers. More importantly for folks not in boot camp, the Arm Shaper produces fast, visible results the very first time you use it. You'll quickly feel the toning and strengthening begin in your forearms, biceps, triceps, wrists, and hands. You'll start performing better in your favorite sport. And you'll look even better in your favorite sleeveless top. Whether you're a weekend athlete or you simply want to improve the way you look and feel, the Arm Shaper represents the fitness breakthrough you've been seeking. Compatible with the Dynaflex docking station, the Arm Shaper produces 40 pounds of resistance and comes with a starter cord and training CD. Features Arm sculpting and toning fitness device with 40 pounds of resistance Built-in gyro mechanism generates results comparable to weight lifting Tones and strengthens forearms, biceps, triceps, wrists, and hands Produces fast, visible results on first use; compatible with Dynaflex docking station Gyro runs at 13,000 rpm; includes starter cord and training CD